TC2/XB2/IM Traction Bar Installation Guide

how to install TB Performance Products traction bar scion im, how to install TB Performance Products traction bar scion tc, how to install TB Performance Products traction bar scion xb, how to install TB Performance Products traction bar toyota corolla im -

TC2/XB2/IM Traction Bar Installation Guide

Congrats on purchasing your TB Performance Products Traction bar for your Scion TC2/IM. In 1-2 hours youll be enjoying reduced wheel hop and torque steer as well as tighter steering.

 

Step 1.) Put your car in the air via jacks or ramps.

Step 2.) Locate the location for the brace to install to. This brace mounts in front of the mid chassis brace just in front of the S pipe. You can use the pictures in my tc catalog for reference.

Step 3.) Remove the 4 bolts.

Step 4.) Slip the brace on

Step 5.) Install brace reusing the OEM hardware. Make sure you leave all four bolts loose while installing. This will keep the brace from getting cocked and making reinstallation of the bolts difficult.

Step 6.) Tighten all bolts down. For your exact years torque spec please call your local dealership.

Step 7.) Remove ramps or jacks

Step 8.) Take your car for a rip and enjoy the added traction and grip!

 

Notes:

If you have difficulties or questions about installing check out the TB Performance Products Army Facebook group. There are a ton of fellow scion owners who have installed these braces. Its a friendly place to ask questions


Leave a comment

Please note, comments must be approved before they are published