install guide corolla trunk brace RSS

Congrats on purchasing your Rear Strut Bar for your E210 corolla! In under 5 minutes you'll have this part installed and be ready to rip the local canyons and enjoy improved handling!  1.) Open your trunk and look to the sides of the trunk. There are 2 clips one on each side. 2.) Remove the cap and remove the m6 bolt behind that using a 10mm socket. 3.) Position the brace and install one side into the bolt hole using the included m6x1.0x20mm hardware and a 10mm socket.   4.) While holding the other end bracket, rotate the bar expanding...