This brace will dramatically increase handling and performance by linking the two halves of the front crossmember together which in turn reduces the amount of chassis flex caused by the lack of torsional rigidity in the area. This area is a known weak point on almost every single front wheel drive car and by bracing it you will notice a vast improvement in body roll and steering response! This product doesnt hang any lower than the stock crossmember so scraping wont be an issue!
-Billet CNC end cups
-High gloss black powdercoat
-Mig Welded steel construction
-Made in the USA
As title states. Prompt email response time too. These braces increased chassis rigidity and removed flex I didnt know was there. 10/10 recommend. Install was simple. Front cross brace bolts torque to 67 ft-lb, rear 98 ft-lb torque. I have TRD lowering springs, DC front strut bar, and Hotchkis rear sway bar on my tC1. The vehicle rode a little stiff and creaked at times. Creaking is significantly reduced for even daily driving. The suspension is able to do its job properly now with its much stiffer chassis. BUY THIS!! Note front cross member is NOT the lowest hanging part on the vehicle.