Installation Guides

how to install strut bar focus rs, how to install strut bar focus st - April 21, 2022

Focus ST/RS Strut Bar Installation Guide

Congrats on purchasing the best strut bar on the market for your focus! In 1-2 hours you’ll be out enjoying the improved handling, grip, and steering response that has made this strut bar the best on the market! Step 1.) Open your hood Step 2.) locate the upper cowl. This is the area with the two vents that the windshield wipers are mounted under. Step 3.) using a torx bit unbolt this cowling. Step 4.) carefully pry off the caps for your windshield wipers. These are at the base of the wiper arm. Removing this will expose a nut....

Ford Focus ST/RS Front Crash Bar Installation Guide

Congrats on your new TB Performance Products Crash Bar! In 2-3 hours youll be enjoying the new look and improved performance! Step 1: remove front bumper. This will involve removing the headlights on each side. Step 2: with the bumper removed, disconnect horns from oem crash bar. As well as the washer fluid reservoir. One bolt on the chassis will keep the reservoir in place. You do not need to fully remove it. Step 3: use a floor jack to come under the oem lower radiator support. Apply pressure but do not lift it. This is here to support the...

Read more

April 20, 2022

Focus ST Crossmember Brace Installation Guide

Congrats on the new TB Performance Products Crossmember brace! In around 1 hour youll be enjoying some seriously improved handling! This brace reinforces the unibody to crossmember joint. This junction is notorious for causing wallowing in corners and reducing handling. Once you get this bad boy installed youll immediately notice a difference! Step 1.) Get your car up on either jacks or ramps. Step 2.) Locate the factory crossmember brace right where the downpipe meets with your catback. Step 3.) You can either choose to replace the factory brace or bolt the TB Performance Products Crossmember Brace over the...

Ford Focus ST Rear Mid Chassis Brace Installation Guide

Congrats on your new TB Performance Products Rear Mid Chassis Brace! This brace is the solution for your exhaust rattles and banging noises with the sweet perk of improving handling and maximizing traction! In about 30 minutes youll be enjoying this brace! Step 1.) Put your car on jacks or ramps. Some people may have long enough arms to do this without lifting the car up. Step 2.) locate the factory brace in the exhaust tunnel. Its about halfway to 3/4 the way back and is secured with two nuts. Step 3.) Remove the factory brace Step 4.) Slip...

Ford Focus St/Fiesta ST/Focus RS Rear Strut Bar Installation Guide

Congrats on your new TB Performance Products Rear Strut Bar! Besides looking killer, this brace will improve handling and cornering grip by reducing chassis deflection. You made the right call by snagging this beasty! In about 2 hours youre going to be out there slaying tires on your favorite road with some added grip! Step 1.) Open and clear out your hatch. Remove those old gym shorts and spare shoes and take out that skateboard you have for car meets! Step 2.) Push on the carpet in the hatch. Youll be able to feel where there is sheet metal...